Ignition coil

 What is this ignition coil?

 say


You must have seen that a spark plug is used for petrol/gasoline engines.




An electric spark/spark created by this plug burns the petrol and the engine starts... This spark plug produces the high voltage required to create a spark through this ignition coil....  




The process that takes place here is similar to a power transformer / CDI unit / control unit of the motorcycle at the time when the ignition coil is to be given a 12v power supply and disconnected ... then like in the power transformer, the 12v power here is almost as high as 22000v Doing so... then the spark in the spark plug is released by that electricity... 




In motorcycles, this ignition coil is connected to the chassis by two pins.... 

Some ignition coils have two pins and some have one pin. From one comes to that pin.... The pin attached to the chassis gets the power supply

The two-pin ignition coil has the same line from the CDI and the lead wire is provided by the vehicle's wire harness. The only difference between the two is the way the wire lead is obtained 
Asitha lakshan

Comments

Post a Comment

Popular posts from this blog

DTS-i Technology

Image
 What is DTS-i technology?     DTSi or Digital Twin Spark Ignition System is a technology developed and patented by Bajaj Auto Limited.     It was first used in Bajaj's Pulsar and Avenger models.  When it was introduced to the market, it was introduced as a unique creation that both saves fuel and improves engine performance.              In automotive engineering technology, perfect combustion cannot be achieved due to the loss of one spark plug in the combustion chamber and the inability to burn the fuel instantaneously. However, the DTSi engine tries to achieve complete combustion by speeding up the combustion process as much as possible.    The DTSi engine delivers twice the power of a typical two-stroke engine and a significant power-to-power ratio compared to several four-stroke engines.     It can also adjust the idle speed and avoid fuel over-burning during intermittent pick-up an...
Read more

Pickup coil , trigger coil , puls coil

Image
Pulse coil / pickup coil  What do you mean?   This is made by putting a small piece of magnet / magnet in front of a very thin wire rod.... The magnetic lines of this magnet have always passed through the coil.... If you move a metal part in front of this magnet, the magnetic lines through the rod will change. We know that if a magnet is moved in front of a wire, a small voltage is generated in the wire... Here too, a small alternating current / AC electricity is produced. It is installed nearby... there is a part like a small groove in the ply wheel... That part is fixed in such a way that it goes exactly to the pulse coil when the spark is to be given in the engine... The CDI Unit/control unit knows the time/opportunity to give the spark through this device... It has two wires, one is connected to the vehicle. It is fixed, it is grounded... the other wire goes to the CDI unit... 
Read more

EGR System

Image
EGR System  Exhaust gas recirculation (EGR) is a method of controlling NOx emissions applicable to a wide range of diesel engines, from light, medium and heavy duty diesel. engines to two-stroke low speed engines. These EGR systems are also found in many categories of engines with auto cycles (typically four-stroke engines)...,        Most EGR systems include the following major hardware components: 01: One or more EGR control valves 02: One or more EGR coolers 03: Pipes, flanges and gaskets A number of other specialized components are possible in different types of systems.     Common examples are mixers using venturi nozzles (venturi mixers or venturi pumps) and EGR pumps, also known as EGR blowers, which are powered by an electric motor or mechanical connection to the       engine. A small tube from the exhaust pipe takes part of the exhaust gas from the intake... Because that part of the gas is very hot...
Read more